Image PM1114 -1
With
the new pluggable readychain speed system, the connection of assembled e-chain
systems can be done in seconds without the use of tools. (Source: igus GmbH)
At the upcoming Hanover Show, igus will be
presenting new components and systems for supplying energy in rough
environments – whether for chip removal in machine tools, heavy duty offshore
applications, or in sensitive and cleanroom production processes, the
innovative e-chain systems from igus make the supply of energy very easy.
Plug & Play: pluggable
energy chain system “readychain speed”
New
from igus, the readychain system revolutionizes the assembled e-chain system.
Designers have fused connectors and mounting brackets into a single unit that
can be plugged directly into the control cabinet. With the new readychain speed
system, the connection of assembled e-chain systems can be done in seconds, and
without the need for tools. The e-chain can be mounted quickly and comfortable
during the production process, especially in production lines that manufacture
moderate amounts of high value components, or inexpensive components in large
numbers at high speeds. This allows machine downtime to be reduced to a
minimum.
Know more about
igus ready chains: http://www.igus.in/wpck/2924/readychainfactory
New chip tight tube opens
from either direction
For
the machine tool industry, igus has developed a new chip-tight tube, the R2.75.
For simple filling, the tube is able to be opened from both the left and right
sides. The extreme tightness against dust and chips is achieved thanks to the
special shape of the tube, which allows chips and debris to simply slide off
the carrier. Additionally, the R2.75 offers a very tight bend radious of just
130 mm.
Visit this link
for more details: http://www.igus.in/wpck/11495/N14_1_0_Overview_EC?playlistid=49
igus e-rover: automatic
coupling of the energy chain
Noise
emissions, constantly rising diesel prices and environmental protection make
the conversion from diesel to electric drives for rubber tired container cranes
(RTGs) is almost inevitable. igus has now gone further to develop the e-rover
system, that meets all requirements. The e-rover consists of a coupling device
including the energy chains: A telescoping arm connects the chain of the
trolley with the energizing chain on the floor. In this case, the telescope has
two functions: first, the RTG is automatically electrically coupled so that is
receiving power and data, then automatically compensates for the lateral
misalignment caused by the drive movement and any differences in height. Even
data transmissions via fiber optics are no longer an obstacle with the
weatherproof e-rover.
For
more info please visit: http://www.igus.in/wpck/6511/N10_1_15_E_Rover
Heavy-duty offshore
applications encounter igus’ energy made easy
igus
proves its knowledge of development of energy supply systems with an offshore
chain specifically developed for heavy-duty applications, to guide cables for
undersea drilling. A flexible, rugged chain body protects the cables and hoses
against mechanical impact, as well as damage from the outside. In combination
with an open designed, a pin-hole connection was deliberately avoided to
prevent the accumulation of dirt. At the Hannover Fair, a test set-up will
demonstrate the system’s capabilities. Around 3,5 meters long, the underwater
chain, made of special plastic, hangs on the testing apparatus where is must
withstand – just as in real-life – very high tensile forces. Designed for
drilling ships, oil platforms, ports, and ships, the relatively open system can
be used above and below the water’s surface.
Image PM1114-2
igus presents the CRC, an energy chain with
flexible and abrasion resistant enclosures for highly dynamic pick and place
applications in cleanroom settings.The
CRC has been certified with ISO Class 1 by the Fraunhofer Institute IPA. (Source: igus GmbH)
Flexible even in the
cleanroom
For
highly dynamic pick-and-place applications like in a cleanroom, igus has
introduced an energy chain with a flexible and abrasion-resistant enclosure,
which has already been certified ISO Class 1 by the Fraunhofer Institute IPA.
The igus CRC’s built in enclosure is able to be opened for maintenance and
inspection purposes. Moreover, the built-in energy chain guides all cables in
the allotted bending radius, and its smooth contours of the crossbars and side
plates make its interior cable-friendly. In combination with the low-abrasion
jacket materials of igus’ chainflex cables, the igus CRC cleanroom system
guarantees a long service life.
The first and only GL certificates
for e-chain cables: igus chainflex
igus
chainflex cables have been approved as the first and only cabled for
dynamically moving applications on ships and offshore applications in energy
chains by the German Lloyd classification society. Here, pioneering work was
undertaken by both igus and German Lloyd. For the first time, the cables have
been specifically tested for continuous motion in GL-type examinations. Using
this framework, igus is able to bring the experience of its unique chainflex
test program. So far, there have been no standards or approval procedures for
moving e-chain cables. In the past, the standards or approval procedures for
moving applications were the same as for cable materials in fixed installation.
However, these are far from sufficient for continuously moving e-chain
applications. With the GL certificates for control, measurement system, bus,
motor, and servo cables of various types and families, igus has extended its
lead as the manufacturer of e-chain cables with the most approvals and
certificates.
Image PM1114-3
chainflex cables have been approved as the first
and only cabled for the dynamically moving applications on ships and offshore
applications in energy chains by the German Lloyd classification society. (Source: igus GmbH)
About igus India
igus®
operations in India started in the year 1998 with head quarters in Bangalore.
igus offers widest range of products that includes polymer bearings, igubal® spherical bearings, DryLin® linear
bearings & guide systems enable them to serve the whole industrial
establishments in India from a small work shop to huge industrial
establishments.
No comments:
Post a Comment